Features: Produces the popular Wig Wag flash.Lights alternate 90 FPM per side.Fully-assembled kit includes:DPDT Rocker SwitchFlasher10 Amp, Blade-Type FusesON Indicator Light12-foot Wire Mounting Hardware Specifications: 12 voltAmp Draw: 25 amps totalDimensions: 2 3/8″ H x 2 7/8″ W x 3 1/2″D

Features: 100% Solid-StateFlashes all primary and secondary warning lights on standard ambulances.Three consecutively rated outputs: A- 40 amps, B- 24 amps, C- 30 amps.Two standard operating modes.Central ground terminal.High-powered Zener diodes protect transistors from damaging voltage spikes.Low voltage protector.Troubleshooting LED indicator lights.Gold, anodized aluminum heat sink. Specifications: 12 voltDimensions: 2

Features: 100% Solid-StateHigh-Beam Override works with the vehicle’s high/low beam switch to prevent high beams from flashing.Compatible with some Daytime Running Lights.Uses vehicles existing high beam lights.Flashes 90 times per minute per side.Must be wired to an isolated on/off switch.Waterproof. Specifications: 12 volt4 amps per side.Dimensions: 7/8″ H x 3 3/4″ W x 3 1/4″L

Features: Low-current control wire.High-Beam Override works with the vehicle’s high/low beam switch to prevent high beams from flashing.Uses vehicles existing high beam lights.Flashes 90 times per minute per side.Can be operated from an existing low-current switch.Solid State.Waterproof. Specifications: 12 volt4 amps per side.Dimensions: 7/8″ H x 3 3/4″ W x 3 1/4″L

Features: Dual Speed: When installing, choose 80 or 220 FPM per side.Night-time Cut-Off: Deactivates flasher when low beam lights are on.Horn Feature: When all lights are off, high beam headlights flash when horn is tapped.High-Beam Override works with the vehicle’s high/low beam switch to prevent high beams from flashing.Uses vehicle’s existing high beam lights.Solid State.Waterproof. [...]

Features: Lights alternately double flash four times, simultaneously flash four times, then repeat sequence.High-Beam Override works with the vehicle’s high/low beam switch to prevent high beams from flashing.Uses vehicle’s existing high beam lights.Solid State.Waterproof. Specifications: 12 volt4 amps per side.Dimensions: 7/8″ H x 3 3/4″ W x 3 1/4″L

Features: 90 FPM per side.Solid State.Waterproof. Specifications: 12 volt4 amps per side.Dimensions: 7/8″ H x 3 3/4″ W x 3 1/4″L

Features: Four flash patterns.LEDs indicate flash pattern.Black ABS plastic housing.High beam override.Solid State.For ground- or positive-switching vehicles.Waterproof. Specifications: 12 volt4 amps per side.Dimensions: 1 1/2″ H x 3″ W x 3 15/16″L

Features: Operates with almost any standard switch.90 FPM per side.Custom flash rates available.Not for use with headlights.Solid State.Waterproof. Specifications: 12 volt30 amps per side.Dimensions: 1 3/4″ H x 3 3/4″ W x 5 3/8″L

Features: Wire directly to headlights and grille or deck lights.Override feature works with the vehicle’s high/low beam switch to prevent high beams from flashing.90 FPM per side.Solid State.Waterproof. Specifications: 12 volt4 amps per side.Dimensions: 1 1/16″ H x 3 3/4″ W x 5 3/8″L